Iron Pour prep

sandmould17

This is a teaser photo of preparations for the iron pour that Steve and I ran at the weekend. It is the inside of a sand mould for an iron beaker vessel. I have put a piece of copper alloy from my beach combing into the mould to see what happens.

sandmould17a

I now know what happened, but you will have to wait….

The pour was a great success thanks to George Beasley, Steve, Eden and the rest of the team at SSW. Thanks also to Charles Clark for the mould boxes.

Advertisements

SSW Emerging artist in residence week 2

Week two saw the completion of my mobile furnace.

This was made in an old gas cylinder – spent a morning filling it with water and then emptying it again to make sure all the gas was out. Then I cut it up to give it a lid and holes for air. Finally I lined it with clay and dried it out.

furnacedryingi_enos These are the chaps playing about with a gas flame thrower to dry out the clay. (George, Eden and Uist)

furncae_enos

The first firing was a bit of a learning process, I struggled to keep the charcoal out of the crucible and I found that two blowers cooled the crucible and blew the charcoal about.furnace1stfire_enos1  The pic shows two blowers going into my wee furnace. I made the housing for the blower on the right too. I managed to pour a small part of a rim,

it is a very pretty colour.bronzerim_enos

I used a horse-poo-mix crucible lid, which was pretty successful, but it melted a bit, so I’m not sure I’d use it for a crucible. I rather like it though.cruciblewilid_enos

Eden and Uist are making a temporary sauna and have whisky barrel staves for cladding. I thought these would make a good local sandbox material and cut the pieces for a small box that will make a spoon mould. This is it screwed together and ready to use.sandboxstaves

Uist did a copper pour (he and Ben had pieces to cast) I added in a couple of sand ring moulds as I don’t like to miss a pour.

coppercastenos

This shows the two wee bowls cast in copper and a mass of copper that mis-poured into the sand pit. I am keeping that for enameling sometime.

Emerging Artist in Residence SSW week 1

I have had one week of my residency at the Scottish Sculpture Workshop in Lumsden. It has been great fun, learning from the masters – George Beasley and Eden Jolly, talking with other artists – Fanny, Uist, Cat and Ben among others and joining in some local activities.

I have found a local sand that seems to be naturally occurring casting sand, Auchendoir_enos

This is the spot where I found the sand/clay in tree roots at Auchendoir. The mixture comes about because of glacial and stream activity and the roots keep the leaf mould out. Some of it only needs riddling to remove stones.It should make good sand moulds for casting.

I made some trial crucibles using local sand and horse poo cruciblesi_enos horsepoo_enos

There are 2 crucible recipes from the book Legacy that I tried; and the horse poo is from the trout farm at Mossat (they also have livestock). I will try pre-firing some and heating the others in the furnace.

We’ve had some great weather so I have been out walking and cycling in the area to gather inspiration.

tapoNorthi_enos

This is Tap o North, my camera shutter was playing up, but I like the skyline..

fungiiv_enos

I am looking for design ideas for bells, maybe fungi will work.